there may be a way to reset your IP w/ out unplugging your router try n use this method. i tried but didnt work for me.
#1
Go to your start menu and select "run" from the programs menu. In the open line type in "command" and press enter.
#
2
You will soon see a black box pop up and a blinking cursor will appear. Do not be scared because you have a box you have never seen before. Everything is normal. Type "ipconfig" and press enter.
#
3
The box will display your current IP settings. If you need to know this information, there it is for you to see. Now it is time to reset the IP address. Type in "ipconfig/release".
#
4
You will notice your internet connection will be lost. Now you will need to renew it. Type in "ipconfig/renew". You have now renewed your IP address. Type "exit" to exit the window. Your internet connection should now be back up.
there may be a way to reset your IP w/ out unplugging your router try n use this method. i tried but didnt work for me.
#1
Go to your start menu and select "run" from the programs menu. In the open line type in "command" and press enter.
#
2
You will soon see a black box pop up and a blinking cursor will appear. Do not be scared because you have a box you have never seen before. Everything is normal. Type "ipconfig" and press enter.
#
3
The box will display your current IP settings. If you need to know this information, there it is for you to see. Now it is time to reset the IP address. Type in "ipconfig/release".
#
4
You will notice your internet connection will be lost. Now you will need to renew it. Type in "ipconfig/renew". You have now renewed your IP address. Type "exit" to exit the window. Your internet connection should now be back up.
I post at Totse2:mad: I like this idea poast. .info totse2 zoklet and TDD all share a common legacy and inspiration. With that being said lets conquer drawball!
It doesn't look like it's going to fit right where it is, the lower black outline is too close to the edge of the banner. I also wasted a bunch of ink earlier trying to fill where it looked like part of it would go :facepalm:
Yeah just finish the outline and if it looks like shit we will refine it.
Things should be a lot more fast paced since we have two other sites on our team.
edit: Looks like people are still filling the T in with black, lol. Whatever happens, if one color seems to dominate, just go with it. Eventually somebody will try to fill it in with white then we can do white. I'm honestly fully down for either color. It would also be funny to do the & in white then the T in black.
The & is definitely going to have to be a little bigger, and the T needs to be thicker.
Just finished the basic "&" outline, will expand on it in the morning, as I just ran out of ink.
Some red is spilling into the top, not sure if it is oriented towards the flag. I suppose that we could just cover it when the time comes, although the main objective at this point should be to maintain the outline.
In Los Angeles, I once had a hot-German-chick boss. I resigned because I was moving back home to Humboldt--but she invited me to her birthday party, which just so happened to be the LAST night I would be in town.
I took her up on the offer.
Got drunk as fuck.
Hit on her best friend.
Pissed in her fridge.
Moral of the story: There's many worse places to piss than into the wind. GO TOTSE!
I'm trying to figure out all these damn drawball scripts.
Rageball is not very good: it's too slow and it actually wastes a lot of ink. The autohotkey script keeps messing up and causing the connection to get lost on my computer. I'm trying to figure out what the problem is and how to improve it, but I haven't got it yet. A combination of syntax errors and not wanting to read the whole autohotkey manual I guess. ATM I'd recommend everyone to use the OwnBall 7 script to fill large areas.
Short Ownball7 guide:
This script basically fills a square with dots. That's the way newspapers fill large area's and pictures etc. to save ink while giving the impression of a completely filled image. The largest brush size is actually the most efficient because of some math I won't bother explaining.
Unpack it, scan with malwarescanner if you want to and doubleclick the .exe. A box will appear with a lot of french settings you can change. If you just want to fill large area's, the default settings are the best you can get to save ink and cover large area's.
If you want it only to dot the places in a color different from the one you're using, select the "detection de couleur" box. This setting gives very messed up results if parts of the background are already in the right color though, as it only reads the color in a small part of the dot it's going to fill. So I usually don't bother and just let it fill everything right up.
Then go to the drawball page, zoom in, select the largest brush and the colour you want and put your cursor between 10 and 11 o'clock (upper left "corner") near the edge of the drawball. Press alt + X and the script will fill a square with dots pretty darn quick. Press alt + X again if you want it to stop before it's done drawing the square. Alt + q quits the app.
Christ, don't the finflagfags have anything better to do? I mena how many times do you really need to cover drawball in a shitty ass flag? At least /b/ is creative and does different designs...
Change of plan. Anyone with infinite ink should bomb the flag with the teal color while the rest of us work on the ampersand. Hopefully they will be too busy cleaning up the vandalism they will leave out progress alone.
I would give it a few more hours. I've set the attack time to 1am GMT. Both this forum and zoklet use that timezone so you can scroll to the bottom of this page to check the time.
Great work, we've managed to hold to T, fill it in a bit, and start the basic outline for the &. Again, I think everyone should be working on the & the most. Anyone with free time and infinite ink should put some real work in on it tonight, flesh it out a bit. I will help.
Comments
#1
Go to your start menu and select "run" from the programs menu. In the open line type in "command" and press enter.
#
2
You will soon see a black box pop up and a blinking cursor will appear. Do not be scared because you have a box you have never seen before. Everything is normal. Type "ipconfig" and press enter.
#
3
The box will display your current IP settings. If you need to know this information, there it is for you to see. Now it is time to reset the IP address. Type in "ipconfig/release".
#
4
You will notice your internet connection will be lost. Now you will need to renew it. Type in "ipconfig/renew". You have now renewed your IP address. Type "exit" to exit the window. Your internet connection should now be back up.
Read more: How to Reset Your IP Address | eHow.com http://www.ehow.com/how_4789982_reset-ip-address.html#ixzz1CgcKnGM6
The issue isn't what IP your computer got from your router - the issue is what IP your router got from your ISP.
Hint: this is the number you're trying to change: http://www.whatismyip.com/
also, in some cases, rebooting your router won't always change your IP. On my ISP, I have to stay off for 8 hours before I get a new IP.
Yeah this won't work since I'm behind a router. Not to mention I have my computer set to a static IP anyway
I wish I could ssh into my modem and reset the IP that way... shit would be badass :cool:
I just unplugged it and plugged it back in and my IP didn't change, so fuck.
Thanks, that was me.
If you can handle it, there are more drawball videos here:
http://www.youtube.com/user/HugeDrawballFaggot
I post at Totse2:mad: I like this idea poast. .info totse2 zoklet and TDD all share a common legacy and inspiration. With that being said lets conquer drawball!
Also it seems like my pitch has been relatively weel accepted over at Zoklet.
Lots of people are interested in helping do something cool in the name of totse.
Let's make it solid.
Looks like theWanderer already posted it over there. They all seem to be on board with it.
It doesn't look like it's going to fit right where it is, the lower black outline is too close to the edge of the banner. I also wasted a bunch of ink earlier trying to fill where it looked like part of it would go :facepalm:
Yeah, it is a bit sketchy, although I think the best way to approach it would be to get the basic shape down and then refine it from there.
If you watch the &T.info video, the initial "totse" was rather askew.
And by askew, you mean absolute shit that eventually blossomed into some rather chiseled awesome blocks of dominance. :cool:
That is more along the lines of what I was getting at.
Haha, "The Union of the Screaming Electron" :thumbsup:
Things should be a lot more fast paced since we have two other sites on our team.
edit: Looks like people are still filling the T in with black, lol. Whatever happens, if one color seems to dominate, just go with it. Eventually somebody will try to fill it in with white then we can do white. I'm honestly fully down for either color. It would also be funny to do the & in white then the T in black.
Amazing stuff. I am in
upvoted:hai:
Just finished the basic "&" outline, will expand on it in the morning, as I just ran out of ink.
Some red is spilling into the top, not sure if it is oriented towards the flag. I suppose that we could just cover it when the time comes, although the main objective at this point should be to maintain the outline.
I took her up on the offer.
Got drunk as fuck.
Hit on her best friend.
Pissed in her fridge.
Moral of the story: There's many worse places to piss than into the wind.
GO TOTSE!
Thanks for catching that. lol :thumbsup:
Rageball is not very good: it's too slow and it actually wastes a lot of ink. The autohotkey script keeps messing up and causing the connection to get lost on my computer. I'm trying to figure out what the problem is and how to improve it, but I haven't got it yet. A combination of syntax errors and not wanting to read the whole autohotkey manual I guess. ATM I'd recommend everyone to use the OwnBall 7 script to fill large areas.
Short Ownball7 guide:
This script basically fills a square with dots. That's the way newspapers fill large area's and pictures etc. to save ink while giving the impression of a completely filled image. The largest brush size is actually the most efficient because of some math I won't bother explaining.
To use it:
Download it here:
http://www.multiupload.com/MDJ1EIVH27
Unpack it, scan with malwarescanner if you want to and doubleclick the .exe. A box will appear with a lot of french settings you can change. If you just want to fill large area's, the default settings are the best you can get to save ink and cover large area's.
If you want it only to dot the places in a color different from the one you're using, select the "detection de couleur" box. This setting gives very messed up results if parts of the background are already in the right color though, as it only reads the color in a small part of the dot it's going to fill. So I usually don't bother and just let it fill everything right up.
Then go to the drawball page, zoom in, select the largest brush and the colour you want and put your cursor between 10 and 11 o'clock (upper left "corner") near the edge of the drawball. Press alt + X and the script will fill a square with dots pretty darn quick. Press alt + X again if you want it to stop before it's done drawing the square. Alt + q quits the app.
More info about the workings of script can be found in these posts:
https://www.totse.info/bbs/showpost.php?p=128539&postcount=34
https://www.totse.info/bbs/showpost.php?p=128551&postcount=36
Focus on the outlines of the letters for now.
We literally need like 30 people on at once to overwhelm all the other drawers. With only a few people we're never gonna get anywhere.
http://kotilauta.fi/
There were others, but I believe this is the current thread:
http://kotilauta.fi/b/res/486842.html
yesterday's thread:
http://kotilauta.fi/b/res/482316.html
This is a good idea. Anyone with infinite ink should just work on maintaining the outline of the & and in 5 hours we should all strike.
its gonna be 10 pm for me. starting the do the & outline in the one doing the " \ "