|
How To Make The Best Spudgun
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
What you will need:
- 1 BBQ igniter (button with small cables)
- 1 PVC or ABS pipe 18" long X 4" diameter.
- 1 PVC or ABS pipe 5 ft long X 1,5" diameter.
- 1 PVC or ABS screwable cap for the 4" pipe.
- 1 PVC or ABS 4"-1,5" adapter.
- PVC or ABS glue
- If you use PVC, clean all pieces before glue it -- use PVC cleaner.
Assembly:
- Glue the 4" diameter pipe into the female plug of
the 4"-1,5" adapter.
- Glue the 1,5" diameter pipe into the other plug
of the adapter.
- Glue the 4" end cap onto the other end of the 4"
pipe.
- Finally, place the BBQ igniter onto the 4" pipe;
make it so it can spark when you press the
button.
Fire:
Place the potato into barrel. Unscrew the cap, spray
some Right Guard, Butane or whatever you want, close
rapidly and FIRE! (press the igniter)
|
|
