A Powerful Pipe Bomb
by joem
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
This is a quite powerful pipe bomb, similar to the CO2 cartridge and powder idea. It made a crater about 2 feet deep and a foot wide in my yard, and split a cinderblock in 2.
What you need:
1' Cannon fuse (da Green stuff)
1 1/2 - 2" long 3/4 in wide Galvanized steel pipe (threaded on both ends)
Caps for both ends of the pipe
Enough Black Powder to fill the pipe
Note: An inside threaded pipe connector can be used with plugs instead of caps for more power (they are usually thicker).
Procedure:
1. Screw on and wrench tighten a cap on one end.
2. Drill a hole for the fuse in the second cap.
3. Fill up the pipe with powder
4. Screw on the second cap and insert the fuse.
Use:
Most effective at making craters when placed about a foot into the ground in a small hole. Be careful to point the caps in a safe direction because most of the time they come flying off like bullets.
|