About
Community
Bad Ideas
Guns & Weapons
Irresponsible Activities
KA-FUCKING-BOOM!
Locks and Security
Scams and Rip-offs
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it

Disabling Alarm Systems Using a Paralizer


NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.

"My friend" ;) used this methode to brake in into a computer store. It i9s relativly easy. You need:

Batery drill

Aligator clips

A paralizer rated at 200KV or hihger

A 9 volt alkaline batery.

Find two wires that lead to the alarm system, this can be the alarm strobe or siren. Never open the box with a screwdriver as a sabotage contact may send a signal to the unit. Instead drill a hole into the box and pull some wires out. Connect one end of the aligator clips to the paralizer while the other end to the wires that provide power to the siren or strobe, making sure nut to cut true the cable (incesion with an exacto knife will do). No worrys as there is no power on the wires (otherwise the sire would allready go) Press the trigger for 10 seconds while Hihg voltage is going from the power cables back to the processor unit. Sparks will jump over sensitive micro procerssors, destroying everything in its path. Best results are achieved by insulating the contacts of the paralizer, forcing thereby the high voltage to discharge inside the alarm systems circuit. After applaying some fun to the system, you can check for safe status by cutting treu the sabotage contact. Wait for 30 minutes (safe distance) as it maight be a silent alarm triggering. After this you may asume safe status and entering the building. Always carry respirator and one or two super value plus containers teargas with you, as you might need this to come out in case of emergency.

 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.

 

totse.com certificate signatures
 
 
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
Hot Topics
The Xbox 360 switch
How to Really Succeed at Bad Ideas
computer alerts?
burning a house down
succesfull lynch?
breaking into the white house?
Free Microsoft products W/O OWNING THEM!
My Latest Encounter with the Police.
 
Sponsored Links
 
Ads presented by the
AdBrite Ad Network

 

TSHIRT HELL T-SHIRTS