About
Community
Bad Ideas
Guns & Weapons
Irresponsible Activities
KA-FUCKING-BOOM!
Locks and Security
Scams and Rip-offs
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it

How to pick locks


NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}
{=--=} {=--=}
{=--=} Picking Combination Locks {=--=}
{=--=} {=--=}
{=--=} Written by: The Byte Byter {=--=}
{=--=} {=--=}
{=--=} The writer of this text file takes <all> responsibility for what {=--=}
{=--=} this text file is used for. Hopefully it will only be used for {=--=}
{=--=} illegal purposes cuz i can't think of a reason it can be used for{=--=}
{=--=} legally. Well, on with the text file. {=--=}
{=--=} {=--=}
{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}

Ok, so ya say ya wanna learn how to pick combination locks...This text
file should help you. As a matter of fact, if ya do it right, it will help
you. First of all, let me tell you about the set-up of a lock. When the lock
is locked, there is a curved piece of metal wedged inside the little notch
on the horseshoe shaped bar that is pushed in to the lock when you lock it.
To free this wedge, you must(must is a word used to much) you usually(that
sounds much better) have to turn the lock to the desired combination and the
pressure on the wedge is released therefore letting the lock open. I will now
tell you how to make a pick so you can open a lock without having to waste
all that time turning the combination (this also helps when ya don't know the
combination to begin with). First of all, ya need to find a hairpin. What's a
hairpin? Well, just ask your mom. She will have one. If she asks what its
for, say ya gotta hold something together... If she says use a rubberband or
use a paperclip, tell her to fuck off and die and then go to the store and rip
off a box of 50 or so. Ok, enough stalling (yea, i was stalling). Once you
have your hair pin (make sure its metal), take the ridged side and break it off
right before it starts to make a U-turn onto the straight side. The curved
part
t can now be used as a handle. Now, using a file, file down the other end
until it is fairly thin. You should do this to many hairpins and file them
so they are of different thicknesses so you can pick various locks. Some locks
are so cheap that ya don't even have ta file! But most are not. Ok, now you
have a lock pick. Now if ya haven't figured it out, here's how ya use it.
You look at a lock to see which side the lock opens from. If you can't tell,
you will just have to try both sides. When ya find out what side it opens
from,
, take the lock pick and stick the filed end into the inside of the horseshoe-
shaped bar on whichever side the lock opens from. Now, put pressure on the
handle of the lock pick (pushing down, into the crack) and pull the lock up
and
down. The lock will then open because the pick separated the wedge and the
notch allowing us thieves to open it. Don't say bullshit until you've tried
it.
because i have gotten lots of beer money from doin' this to fellow students'
gym lockers. Also, this technique works best on American locks. I have never
picked a Master lock before because of the shape a pressure of the wedge but
if anyone does it, let me know how long it took. Also, the Master lock casing
is very tight so ya can't get the pick in. So, if you're locking something
valuable up, use a Master, cuz at least ya know I won't be picking it and I'm
sure there aren't that many that could. And when i say pick, i don't mean
lighting a stick of dynamite next to the lock, picking is opening a lock
without
t using force, making a substitute key, etc... If any of you believe that this
information is not sufficient for picking an American lock, or any other kind
besides Master, leave me a message at /\/\etalland 1 (503) 538-0761.
This concludes my text file on picking combination locks. My next text
file will probably be "Picking key locks". See ya later.
The Byte Byter
^^^ ^^^^ ^^^^^
||| |||| |||||
^^^ ^^^^ ^^^^^
^^^ ^^^^ ^^^^^
^^^ ^^^^ ^^^^^
''' '''' '''''
This text file was written on 06/21/85.


 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.

 

totse.com certificate signatures
 
 
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
Hot Topics
Free Logitech Products Wihtout Owning
Urban Exploration
graffiti on google earth.
joining the military.
Cutting the gas line
How do I get rid of my roommate?
The Xbox 360 switch
How to Really Succeed at Bad Ideas
 
Sponsored Links
 
Ads presented by the
AdBrite Ad Network

 

TSHIRT HELL T-SHIRTS