About
Community
Bad Ideas
Drugs
Booze - The Legal Drug
Legal Issues of Drug Use
Marijuana
Miscellaneous Drug Information
Nitrous
OTC Drugs and Household Items
Psychedelics
Rare and Exotic Drugs
Speedy Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it

Making a Still


NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.


$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$ $
$ THE STILL $
$ --- ----- $
$ $
$ AN ARTICLE FROM THE BOOK: $
$ $
$ THE POOR MAN'S JAMES BOND $
$ BY KURT SAXON $
$ $
$ $
$ Typed and Uploaded by: $
$ $
$$$$$$$$$$$$-=>Lex Luthor<=-$$$$$$$$$$$
$ $
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

In a phew philes on this system some of the recipes need a still, well here
is how to make a still:

Once you get the chemicals, ingredients, or what ever, you set up your
still. It is small, efficient, and safe. In it you can make things like
tear gas, prussic acide and occasionaly distill some alcohol.

First, a flask is fitted with a one-holw rubber stopper. A short length
of thin glass tubing is inserted into the hole. A five foot length of thin
rubber tubing is fitted over the glass tube and coiled into the ice bucket and
out through a hole near the bottom. The end of the tube is fitted over another
glass tube which is in a two-hole stopper stuck into a bottle. The other hole
contains another glass tube to which is attached another length of tubing long
enougb to reach outside to get rid of any noxious or poisonous fumes.

The equipment for a still is cheap and simple to get. Most of it can be
bought from your local drug store.
They carry tubing, stoppers, glassware and many chemicals which they freely
sell to doctors, students etc. If you get on good terms with your druggist
and he doesn't know you are crazy you can buy most of your stuph from him.

A ring stand or tripod for the flask is more handy than the can in the
illustration (see below). But a tin can with strips cut out of it for ventilat
ion and for the removal of the lamp is usually adequate.

CHECKLIST OF EQUIPMENT:

<1> alcohol lamp.
<2> ring stand, tripod or tin can.
<3> 500 ml or larger flask
<4> assortment of one and two-hole holeless rubber stoppers of various
sizes.
<5> about six yards of 3/16 of an inch (inside diameter) rubber tubing.
<6> about a foot of six millimeter (outside diameter) laboratory glass
tubin.
<7> child's plastic bucket
<8> receiving bottle.

The hole in the bucket for the tube is made somewhat smaller than the tube
so it will fit snugly and prevent leakage. Full strength wood alcohol for
the lamp can be bought at the drug store. Rubbing alcohol, although 30% water
will burn in the lamp but not so well. You can distill the purt alcohol off
the water from rubbing alcohol.

This is best done over a gas or electric stove. First a large pan with
a couple of inches of water in it is put on the burner to be used and the
others are turned off.

The still is set up as the illustration except the receiving bottle is
larger and doesn't need a stopper or tube going outside. The flask is filled
with rubbing alcohol to just under the neck and set in teh pan of boiling
water.

In this setup a coathanger wire with a loop in its middle is put over
the neck of the flask and fixed on the sides of the pan. This is necessary
because as the alcohol distills off, the flask gets lighter andb would rise
in the water and fall over without support.

Another consideration is to make sure the tube does not flop over and
collapse. This can be prevented by hanging a string from the ceiling by
which the tubing is held above the flask.

The tubing should be further supported so it does not touch the hot edge
of the pan. If it is allowed to lie over the edge it will melt.

When the action starts the alcohol will fairly flow into the collecting
bottle. When it stops all that is left in the flask will be water. If left
alone water would start dripping, much slower than the alcohol, but this is
not wanted.

This is the only case where you should distill over a stove. A stove
is harder to control than an alcohol lamp. It is also harder to clean up
than a table in case of an accident.

ILLUSTRATION ---->--
!



!=================
! !
% <-flask ------- to
% !->! ! *! outside
%%% plastic!* !------ !
%%%%% bucket ------- ! !======
----- w/water & ice~ ! !
! . ! -----
!.~.! reciever->!. !
!~~~! !. !
!###!<-tin can !$$$!
stand -----
~
!
alcohol
lamp
THE STILL


 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.

 

totse.com certificate signatures
 
 
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
Hot Topics
2c-I Vendors
hangover helper
Cocaine Cutting
ingesting coke corally
DMT... why is it illegal?
HBWR wtf
Alternative to shtrooms?
Coke and Paranoia
 
Sponsored Links
 
Ads presented by the
AdBrite Ad Network

 

TSHIRT HELL T-SHIRTS