About
Community
Bad Ideas
Drugs
Booze - The Legal Drug
Legal Issues of Drug Use
Marijuana
Miscellaneous Drug Information
Nitrous
OTC Drugs and Household Items
Psychedelics
Rare and Exotic Drugs
Speedy Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it

Acidmelts Slacker Reaction

by Acidmelt


NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.

Acidmelts Slacker Reaction

This reaction is brought about the same as every other push/pull rxn in the book. You have to know how to extract psuedoephedrine(E) and clean it, you have to know how to extract the red phosphorus(RP) off matchbooks (or where ever you get it from), and how to properly clean the red phosphorus. you must also know how to clean up your iodine(I2) to a proper grade.

I am not going to go into how to do these procedures as they are covered in seperate pages on Chemhead. with this easy to follow synth, i will start at mixing the reactants and where to go from there. keep in mind that this is only a dream and a very simple dream at that. i have never tried this and i have never met someone that has tried it. its just well organized thoughts in a well organized matter. i don't condone this activity or any illegal activity for that matter. don't try this at home. (try it at a neighbors house when they are gone for the weekend)

What you will need:

1.Flask with nipple connection
2.Stopper (that fits the flask)
3.Electric Burner
4.Candy Thermometer
5.1and 1/2ft. of plastic tubing to fit on the nipple of your flask
6.Separatory Funnel
7.Chemical Resistant latex gloves
8.Visionware Glass Bowl or pot.
9.Regular cooking pot
10.Distilled H2O
11.RedDevil Lye
12.Hydrocloric acid (Muriatic Acid)
13.Duct Tape
14.Litmus Paper
15.Non-Polar Solvent (Colemans Fuel, Toluene...)

ok here is how it goes... use the 1 part E, to 1.2 parts I2, to .8parts RP ratio for reactions under 1oz. So for example you would use 10g of E, 12g of I2, and 8g of RP. First take the RP and the E and mix well in a plastic baggie. Take this and pour it into your flask, covering the bottom of it. Next pour in your I2 and close with a solid rubber stopper. Duct tape this on so it dont pop off during the reaction. you should all ready have your foot and a half of plastic tubing secured onto the nipple of the flask, and a pair of your chemical resistant gloves on. After you get the 3 goodies mixed in the bottom of the flask you will want to hold the end of the tubing closed with your thumb.(gloves on!)(safety glasses too)

Sit back and watch it start to react. Sometimes it will react right away and sometimes not. Just watch and see. It will start turning to a muddy texture, and then to a liquid. Every onece and a while release pressure in the flask by moving your thumb. now it will not always turn liquid before the cook. not totally liquid anyway. Just sit back releasing pressure when it gets great and wait for the reaction to really slow down.

All right, everything going good so far? Not too hard heh? Now you will want to cook the reaction to get it going again. Before you start all of this put your regular cooking pot on your electric burner and find out where the dial is at 150F. So turn on your burner and set it at 150F. Put your cooking pot with a little water or vegetable oil in the bottom on the burner, and put your flask in that. after a few minutes this bitch will really get cookin. It will start bubbling and the mixture will expand. All in all it is going to start to get a little crazy. Every few minutes pick up the flask and shake and stir it up a little. And usually release a little pressure every shake or every other shake. You will be able to feel the pressure building up on your thumb. When it gets bad release a little.

Just keep this going for while. You will want to slowly turn up the heat to about 180F over a 20 minute period. The push part of the reaction will keep going for about 20 minutes to 45 minutes. It usually lasted for about half an hour in my dreams. You will know when to stop cooking when the push stops. (when no more gas is being pushed out of the flask. When this has occured be sure to keep your thunb over the tubing and take the flask out of the pot and just set it on the counter. From this point on, you are going to keep your thumb tightly over the tubing until the flask has cooled down. During the cooling you want to pick up the flask with your other hand and stir and shake the ingredients in the flask every few minutes. It will probaly take about 20 minutes (if that) for the flask to cool down. You want it to be cool enough to hold in your hand with out burning yourself. You will feel the pull start as your vessel cools down. it will be trying to suck air back into the flask now. You are aloud a very little bit of air into the flask but not much at all. Remember to keep stirring and shaking the flask during the cooling.

When the flask has cooled down to a suitable state, (keeping your thumb over the tubing still) stick your thumb and the end of the tubing into a bowl of distilled H20 and release. The vacuum in the flask will pull water into the flask. Dont let to much into the flask just a little. now pull the tubing out of the water and let it suck air into the tubing. Thats it. thats the reaction. not to hard hey? Now lets clean up that chilli. All ready smelling success? wait and see.

Shake up the chilli/H20 in the flask, take off the duct tape and the stopper, and pour directly into the clean visionware bowl. now pour a little more distilled water into empty flask (just a little) and shake up real good. this is just to get out the rest of what ever is left in the flask. put the bowl on the burner and turn on high. bring to a boil while stirring with a clean plastic spoon. This will get the some chilli that is stuck on the RP off of it. turn of burner and let sit for a minute or two. be sure to save all your RP so you can wash it and reuse it later.

While this is cooling off a little, grab your funnel and put in 3 coffee filters and stuff a cotton ball in the tip of the funnel. put this over a clean glass jar. now pour everything that is in the visionware bowl into the funnel. it will take a while to filter because of the RP. once all the meth water is filtered through, into the glass jar, pour it back through the same filters (with the RP in it) again. you will want to do this at least 4 times. just keep pouring it through the same filter/cottonballs. now it should have a yellowish collor, but not foggy at all. it should be very clear.

Pour this into your separatory funnel, and add just a little ice. now pour in a little colemans fuel (or toluene). add a little less than the amount of water/meth you have in there. now slowly add a little lye to the sep. funnel, and shake well. drop a small drip onto your litmus paper to test the Ph. (you will be testing the water/meth layer, NOT the colemans fuel layer) you want the Ph to be 12. (yellow) if it is not a Ph of 12 then add a little more lye and shake the hell out of it and test again. keep doing this till it test out at 12. After it test at 12 drop in a tablespoon of table salt, and shake well. Now we are going to seperate the layers in the funnel. We want to keep the NP Solvent (Colemans), not the water/lye layer.

Put the water layer in a jar and set aside. you can test for meth later. Keep the colemans fuel/meth in the seperatory funnel. microwave a big glass of new distilled H2O till it is hot. pour in one third the amount of water (compared to the colemans) and shake well. drain the water out. repeat this 4 times. you are washing the NP Solvent. now once again, add one third the amount of water to the sep. funnel and drop in a few drops of Hcl. (Muriatic Acid) Shake for a few minutes. then test the ph of the ph of the water layer. you want it to test at 7.2 or at least close to that. if it doesnt, add a few more drops of Hcl and shake the hell out of it again and test again. after it is the proper ph, drain the water layer into your visionware bowl and put it on the burner and boil down. you can finish with a hairdryer if you want. now go back to your colemans fuel in the seperatory funnel and add a little more distilled water. we are going to do a second pull on the non-polar solvent. add a few more drops of Hcl and shake it up again. test the ph again. looking for 7.2 again. once you reach 7.2 again drain your meth/water into your clean visionware bowl (you should have all ready scraped out the crystals from the last pull that you all ready evaporated. now evaporate again. remember that if your not in a hurry, evaporating it with a hair dryer will increase yeilds. Some chefs even do a third pull.

Thats it. you now have clean and pure crystal meth. if you want to clean up even more read up on it on the recrystalizing page on Chemhead. Have Fun, and be safe.

 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.

 

totse.com certificate signatures
 
 
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
Hot Topics
hot naptha bath
Oxycodone from Codeine
yes another nano thread...
hughjorgen + annie
Extraction of menthol from petroleum jelly
epinephrine inhaler?
Pesticide synth
the raid thread
 
Sponsored Links
 
Ads presented by the
AdBrite Ad Network

 

TSHIRT HELL T-SHIRTS