Phone Taps
by The Jolly Roger
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
There are many different
types of taps. there are transmitters, wired taps, and induction
taps to name a few. Wired and wireless transmitters must be
physically connected to the line before they will do any good.
Once a wireless tap is connected to the line,it can transmit all
conversations over a limited reception range. The phones in the
house can even be modifies to pick up conversations in the room
and transmit them too! These taps are usually powered off of the
phone line, but can have an external power source. You can get more
information on these taps by getting an issue of Popular
Communications and reading through the ads. Wired taps, on the
other hand, need no power source, but a wire must be run from the
line to the listener or to a transmitter. There are obvious
advantages of wireless taps over wired ones. There is one type of
wireless tap that looks like a normal telephone mike. All you have
to do is replace the original mike with thisand itwill transmit
all conversations! There is also an exotic type of wired tap known
as the 'Infinity Transmitter' or 'Harmonica Bug'. In order to hook
one of these, it must be installed inside the phone. When someone
calls the tapped phone & *before* it rings,blows a whistle over
the line, the transmitter picks up the phone via a relay. The mike
on the phone is activated so that the caller can hear all of the
conversations in the room. There is a sweep tone test at
415/BUG-1111 which can be used to detect one of these taps. If one
of these is on your line & the test # sends the correct tone, you
will hear a click. Induction taps have one big advantage over taps
that must be physically wired to the phone. They do not have to be
touching the phone in order to pick up the conversation. They work
on the same principle as the little suction-cup tape recorder
mikes that you can get at Radio Shack. Induction mikes can be
hooked up to a transmitter or be wired.
Here is an example of industrial espionage using the phone:
A salesman walks into an office & makes a phone call. He fakes
the conversation, but when he hangs up he slips some foam rubber
cubes into the cradle. The called party can still hear all
conversations in the room. When someone picks up the phone, the
cubes fall away unnoticed.
A tap can also be used on a phone to overhear what your modem is
doing when you are wardialing, hacking, or just plain calling a
BBS.
If you think that you line is tapped, the first thing to do is to
physically inspect the line yourself ESPECIALLY the phones. You
can get mike replacements with bug detectors built in. However, I
would not trust them too much. It is too easy to get a wrong
reading.
|