Totseans

Tag: Darche

  • How to Ingest Pills Intravenously

    How to Ingest Pills Intravenously

    How to:
    Ingest Pills Intravenously
    Intravenous use of pills
    DISCLAIMER:
    THIS GUIDE DOES NOT SUGGEST OR CONDONE IN ANY WAY INTRAVENOUS DRUG USE. FURTHERMORE TOTSE.INFO AND ALL MEMBERS THEROF TAKE NO RESPONSIBILITY FOR THE USE OF INFORMATION CONTAINED WITHIN THIS OR OTHER ARTICLES.

    So you’re ready to take the leap into intravenous ingestion of pills. First things first, this can be dangerous if you don’t know what you’re doing.

    What you will need:

    • Pill
    • Small metal basin (bottom of a soda can, spoon)
    • Syringe (your best bet is a 1cc allergy syringe)
    • Water
    • Filter (cotton from a qtip or unused cigarette works well)
    • Fire (preferably from a lighter, candles work, avoid matches)
    • Paper (nothing too thin)
    • Hard, flat surface
    • Hard object (not a penis)
    • Small Razor (no required but recommended)
    • Belt (any long chord will do as long as its durable)

    Step 1: Research
    Play it safe. Before doing anything make sure that you know exactly what you are going to be shooting up. You don’t want to overdose so research the pill. You want to know exactly how many milligrams there are and what your drug of choice will do to you considering the kind of high you will get and especially the come-down. Do your research! When you are confident about what you know and your safety with it you are ready for the next step.

    Step 2: The Pill
    Take your pill and break it as much as you want over the paper so that you don’t lose any. Now fold the paper securely with the broken pieces inside. Make sure it is a secure fold so that no powder or pill pieces can escape. Now place the folded paper on your hard surface and use your hard object to pulverize the pill inside. Be careful not to rip the paper and spill its contents. Continue to do this until the pill is broken down to a fine powder, as fine as you can manage. It isn’t necessary but you may want to use a small razor to chop up the powder.

    Step 3: Cooking


    Set the paper aside for now. Take your syringe and fill it up with water. Empty that water into your basin(if you are using a spoon you need to bend the spoon so that it will rest on the flat surface without spilling). Take another .5cc and add this to the basin because you’re about to simmer your pill and much of the water will turn to steam. One your basin is filled with water unfold the paper carefully, leaving one crease and pour its contents into the water. Now carefully and steadily hold the basin over a candle or an ignited lighter. In a moment the brew will come to a simmer. You may want to stir it a little which is okay but not necessary. Don’t boil your mixture or it will start popping and you will lose much of it. It shouldn’t take any longer than 20 seconds depending on the thickness of the metal basin. Once finished simmering slowly and carefully place the basin on the flat surface. You’re ready for the final step.

    Step 4: Clean Injection
    You’ve almost got everything ready. It is time for the filter. Simply place your cotton filter into the basin so that it soaks up a majority of the liquid. If you are using a clean cigarette cotton you should rip it in half first. If you are a q-tip take the cotton off both ends and mesh it together. You don’t want a big filter. Half the size of the basin is too big. Now pierce the needle of the syringe into the filter and draw. Certain pills will cause the liquid to draw slowly but do not get discouraged. Once you have filled your syringe set it aside. Loop your belt (or tie your chord) around the upper part of your arm, where your bicep is. Tie it very tightly so that your veins are poking out. Make the hand of that arm into a fist and pull it forward a few times if you can’t see your veins. After this if you still can’t see them… good luck. There is a very prominent vein on your arm at the crease of your elbow. This is the same vein that doctors use for setting an IV. This vein is your best and safest bet. Take the syringe and push the needle tip into this vein carefully. You want to come at it from an angle so that the needle doesn’t just puncture through but instead enters the vein. You will likely hear/feel a second pop when you have succeeded. If you think you have it in draw a little into the syringe. When you do this if you draw blood then you’re good to go, if not then try again. You may not want several needle marks on your arm so if you don’t get it right the first time you can wriggle the needle around without removing it and try to catch the vein. Once you are sure you have the needle in remove your belt (chord) and push in the plunger. Now just sit back and relax as you enjoy your instantaneous intravenous high.

    Discuss http://www.totse.info/bbs/showthread.php?t=10696

  • Hot Railing & Hot Knifing

    A lot of people may not know about this method of ingesting their DOC. It’s is relatively easy to do. The only really hard part is finding the thick glass tube that can withstand the temperature needed to vaporize the substance. The tube needs to be rather thick, I’m talking like a half inch to an inch thick and about 6 inches long.

    I’ll start with the hotrailing:

    You need a blowtorch or either a butane lighter with a large chamber to hold the butane. First make your substance into a line on a flat surface. Take your heat source and heat one end of the glass tube to the temp that would cause a tube of metal of the same size to be red hot.

    MAKE SURE YOU DO NOT PUT THE HOT END IN YOUR NOSE. I have seen this happen and it’s not pretty, funny (to a dickhead) but not pretty. Now hold on nostril shut and inhale the line through the hot end into your other nostril. You will blow out a good cloud of smoke if done right. This method makes the most out of your substance because you do not leave residue in a pipe/stem/whatever. This method is good for meth, heroin, decent coke, and one of my favorites, kief.

    Hot Knifing

    This method is best used for pressed hash. You can use a blowtorch for this too, but if one is not available you can use a stove that has coils. Now you need two butter knives. Use your heat source to heat one tip of the butter knife to red hot. Now be careful having your stove on high for a long time if it is beside your refrigerator. I warped and melted the side of mine.

    Now while knife #1 is heating take your piece of hash and pressed it onto the tip of knife #2. Now cut the nozzle off of a 20oz or 2 litre soda bottle off and have it ready. With some practice you can use a straw and when you get real good at it you don’t need anything.

    Okay hold the bottle nozzle in your teeth while you get the knife with the hash pressed to the tip. Get the knife with the hot tip in the other hand. Now hold them both under the bottle nozzle that is held in your teeth. Blow out all your breath and pressed the two tips together under the nozzle while you are inhaling. If done correctly the hash should vaporize instantly. Enjoy.

    While I’m on hash, another fun way to smoke it is something called a hash monster. Use a paper clip and fold it into something resembling a tripod with one of the points sticking up. Put your ball of hash on the point. Have a small glass ready also. A whiskey glass works well. Light your hash on fire, let is flame for just a split second and blow it out while putting the glass over it. This has to be done on a flat surface. The glass will fill with smoke. Slide a straw under the glass and inhale it.

    All these methods are designed to not waste any hash by not leaving unsmoked residue in your smoking implement. Hope these can entertain at a party and get more for your buck with your hash. If anyone has anything else to add please feel free to do so.

    Discuss http://www.totse.info/bbs/showthread.php?t=10745

  • Freebasing For Noobs

    With the prevalence of crack, making one’s own seems a little pointless. Why bother with the process at all when you can hit the corner or dial up a $20 and be on the higher plane that much faster? There are a few good reasons why anyone who likes coke and wants to get a bigger rush, without using it IV, should make their own base as opposed to buying street product. But first some basics;

    Powder coke is cocaineHCl, that means it is a salt, a hydrochloride salt to be precise, of cocaine base. Cocaine is produced first in the base form, then dissolved in acetone, and reacted with hydrochloric acid to form cocaine hydrochloride. CocaineHCl is for snorting, because it is water soluble, you can smoke it sprinkled in a doob or a hand rolled smoke, but you can’t smoke it in a pipe because the heat level required to vaporize it also breaks down the compound itself. Cocaine base is easily smoked in a pipe on a bed of ash, or in a crack pipe with coarse steel wool.(brillo) When you freebase, you react the HCl ion with a base, removing it from the cocaine, leaving simple cocaine base, which is good for smoking. Some adulterants, meth in particular, will still be there, but it will be smokeable regardless.

    Making your own base means you are not at the mercy of whomever cooked the shit up, and even though most people will tell you that crack is just cocaine base, any dealer with an eye for profit can doctor it in numerous ways. If you want base, find some good quality powder(yes I know it comes in chunks), and follow the instructions.

    Baking soda base;

    Find a good sized soup spoon and clean it. Measure out the amount of powder you want to base in a pile, and make a pile of baking soda beside it about 1/3 the size. I would recommend about .2 of a gram of cocaine to start with. Do not use baking powder, it is different, do not use soda that has been sitting in the fridge for 3 months.

    Chop the piles together and put them in the spoon. Balance the handle end of the spoon on a thin book so that the bowl of the spoon is level. Using an eye dropper, or a bottlecap, drip water into the spoon till the soda and coke are covered, and a little bit more besides. Hopefully you are using a big spoon, and the water level is about halfway up.

    Sometimes it starts to react right away, and will fizz a bit. Stir it with a toothpick or a match a bit if you want. Pick up the spoon and heat it gently with a lighter held about an inch or two below the spoon. The reaction should fizz away for a while, make sure it does not get too hot, high temperatures break down cocaine, and overcooking can screw up your batch. Slow and steady. Heat it until the reaction stops, and little clear
    islands of the good stuff are floating in the spoon.

    Now a little technique comes into play, you can skip this if you want. Swirl the contents gently to encourage the little globs of freebase to merge, this will make it a little easier to deal with later.

    If you have really shitty coke full of glucose and manitol, you might notice that not much has come back. Some shit blow is less than 20% real coke, so sorry about your luck, and if you have a bunch of shitty coke go to the ether method at the bottom, it is from the 70’s when all the coke was garbage.

    Now you wait, putting the spoon in the freezer helps a bit, but sometimes this takes a subjective eternity. The clear oily bits should form into little hard chunks. Wait a little bit more, sometimes they might look solid but are still a little sticky. If you started with good coke you should have a few big pieces and some shrapnel, take the biggest one and proceed to “Smoking it” If it is still in little tiny pieces, dump it out onto a flat coffee filter and scrape up your goods.

    Ammonia base;

    For this procedure use only hydrous ammonia with no detergent or scent additives(unless you like lemon scented base). This is sometimes a little hard to find, usually “sudsy” original brand is good, and so are a lot of discount brands. Look for words like Pure on the label.

    Take your spoon and balance the handle end on a small book so the spoon bowl is level. Toss in your blow, again about .2g is optimal. Use an eye dropper or bottlecap to pour the ammonia over the blow till it is covered, and a little bit more. It will be a less vigorous reaction than the soda method, but it will fizz a bit. Heat gently, and you should eventually get the same result as the soda method. I advise rinsing rocks made this way

    The ammonia/ether method;

    This is some serious shit. It is for making large quantities of shitty coke into something useful, or for people who are familiar with the dangers of ether. I have only watched this being done, but the results were fucking amazing. So I will try to pass it on.

    Getting clean ether is important, the person who showed me this used industrial grade ether. Get ether from a reliable source, if you are tempted to use “starter ether”, which is sprayed into diesel engines to help them fire up, have fun, there are a lot of articles on how to clean it.

    Take your blow, and I would recommend at least .5g, and put it in a 2oz shot glass. Add ammonia until the shot is 1/3 full, it will start to fizz and you should stir it with a toothpick until the reaction calms down. Then use an eyedropper to add the ether one drop at a time, stirring it a little after each addition. The ether will settle to the bottom of the shot glass. Once you have the glass about 1/3 full of ether and the rest ammonia, put your palm over the top of the shot glass and while keeping it right side up, shake it gently for a good long time, at least a couple of minutes.

    Now you are wondering what the hell happened to my coke? Don’t worry, it’s still there, it is just in solution with the ether. Now take the eye dropper, squeeze the bulb, put the end right down to the bottom of the shot glass and draw up some of the ether. Then put the eyedropper over a good sized piece of glass and slowly pinch the bulb so the ether drips out a drop at a time. Allow each drop or two to evaporate before dropping more. The white/yellow stuff forming on the glass is the purest cocaine freebase you will ever get. Scrape it up with a blade, and enjoy.

    Smoking it; Use a good steel pipe with a fine screen, place some cigarette or joint ash on the screen, it has to be a fair bit, enough that if it was weed it would be a good bowl, and place your base on top of it. Put a lighter to it and draw in a moderate way, not too fast, not too slow. Exhale a massive cloud of smoke. Feel fucking great for 73 seconds, then chase the rainbow for the rest of the night. Also, you can smoke it in a stem, but setting up each hit nicely will slow you down a bit, and if you do too much good base at once you can have a seizure and die choking on your tongue while your friends fight over who gets your next hit.

    C/O
    “now that’s entertainment”

    Discuss http://www.totse.info/bbs/showthread.php?t=10864

  • How to Make a Bubbler Out of Household Items

    How to Make a Bubbler Out of Household Items

    Many of us battle daily with chores such as eating, sleeping, and common sense. Today I’m going to teach you how to make a tool that will help you battle these acts.

    Materials needed:

    • A lightbulb
    • Salt
    • Needlenose pliers

    The Process:

    1. First use the pliers to remove the metal plate from the end of the lightbulb
    2. Then hit the black part until it cracks/caves in and remove the chunks.
    3. CAREFULLY remove the filament from the bulb
    4. It is now a good idea to insert the pliers into the bulb to get rid of any glass left over from removing the filament. Be careful not to damage the bulb!
    5. Pour salt into the bulb and cover the hole
    6. “swish” the salt around until the bulb is completely clear
    7. Pour the salt out making sure there is none left behind.

    And there you have it. A perfectly good bub.

    Additionally you can:

    1. Heat up a silver dollar sized area on the bulb with a torch
    2. Apply direct heat to the center of the silver dollar sized area until it turns red hot.
    3. Blow as hard as you can into the bulb until the area opens creating a “carb”

    Discuss

  • Harm Reduction: Common misconception about ‘cotton fever’

    Harm Reduction: Common misconception about ‘cotton fever’

    Written by fr0st Byte

    After being around opiate users for many years I think this is the most misunderstood thing involving opiate use. Even people I thought were seasoned vets still think this.

    99% of the people I meet that I hear talk about cotton fever think for some reason this aliment is caused by a piece of cotton going into your vein. I guess this got started because of the name people gave this problem, cotton being in the term that is. This is completely untrue.

    Think about it, do you really think a piece of cotton is going to be able to go into your vein, or even into a small gauge needle? I have had cotton go into a needle and it completely clogs it.

    Cotton fever is caused by people saving their wet cottons up and using them to make another shot when the desired amount of cottons are reached. They save these wet cottons which are pretty much the perfect environment to harbour and grow bacteria. Once again, think about it… What causes a fever? An infection. What causes an infection? Bacteria.

    So to avoid cotton fever. First off, don’t save cottons. But if you do want to save your cottons: make sure you separate them and set them out in open air on a dry non-porous surface. The idea is to let them dry out.

    If you do get cotton fever, take some APAP and drink plenty of water. Just keep telling yourself it will go away within 4-12 hours. You do need to monitor your temperature though. Because it it does get past 103F you need to go to the doctor. I hope that part is common sense.

    I hoped this helped anyone that may have been mistaken.

     

    Discuss