wurfgurf — Totseans

wurfgurf

What have I done? I created a monster and I'm fighting myself. Wow

About

Username
wurfgurf
Joined
Visits
178
Last Active
Roles
New User

Comments

  • Btw, please call Elon Musk, I have a gift for him and given you are keenly aware of qface, we can consider this the 'transverse' version of 2018. This time you get your (wo)man and even BETTER, you have your CaKE and EAT it ToO!!
  • There is not a damn thing about me that is mail but I started out that way so figure it out
  • I'm in the southeast United States. If you want to find me just Google me it's not hard even the damn United States govt found me without even trying. I need a dick like someone needs antivenin for a sbakebite!! I swallow, i do whatever the fuck u want if drink. Shmg. Read carefuĺly
  • I want some guy to take my virginity.. I've been on hormones for sometime now...
  • Pebbles, where in any version of these methods does it say to salt out your pse? As for my mentioning chcl3 as a solvent, well, idk what prompted it. Probably bc even imagining using it is trippy and I was a heavy side smoker then.
  • Aye aye aye... I didn't read too carefully. I sent the actual DEA PDF here but god only knows. So anyways, hi my friends at dea! I know you like it here as fishers of men do. Im Telling you this: plz allow me to watch porn again, plz, no if then just please please please let me get gay with myself. I'm a fucking virgin for…
  • I remember 40 ml an to 60 lye, so maybe up to double that for each, but it's all a matter of how fast you want the reaction to go. Double the amount of lye to an and it goes a bit slower but you also have a safer cooking, in theory that is.
  • Everything you are asking would be preferable to everything else. Sodium is more selective toward benzylic reduction meaning sodium is better and hexane is THE solvent of choice. It's just extremely volatile and flammable at least as much as ether. Hypothetically speaking of course, make sure your vessel is decent. You…
  • Sodium is even better as it doesn't over reduce as much as lithium does. Substituting calcium might work, making a hexamine instead of tetra but would probably over reduce, unless ammonia was substituted as well, something like ethylenediamine. Methylamine or ethyl amine, primary amines, should also work and have the added…
  • There are a few sites on line that speak of pressure capable borosilicate glass. I watched a cook done in a bug sprayer pressurizer with no burping, then release which was done similarly to fex. I still get a kick out of the gnome for an Rv.
  • Lol funny to say this but I would so much rather be wrong.
  • I have done odd things with meth, but not coke. I found you could mix baby oil with Vaseline, making a thin gel, throw some meth in, stir till even, and apply to ass or vaginal opening for instantaneous hornyness. You can probably put a little in your palm and shake a future bosses hand for added luck toward job…
  • One more thing: you have a book or two on chemistry you ought to crack it open every once in a while. In there is a whole set of keys to a whole set of drugs! There are some that are not even tapped into yet. Wait till the day comes when I introduce methamphetacubanamine. I can't even imagine what cubane could really add…
  • Btw it's not possible to get the ratio to that of a birch/benkeser. Not without a real reaction vessel, i.e. Low pressure autoclave. They consider less than 100 atmospheres low pressure work! But then that makes sense considering 100000 atmospheres (multiply by 14 to get psi as one atmospher is 14psi)
  • I always based the ammonia on the ammonium salts, lye being secondary. A tweaker of phenomenal proportions pointed out to me that "two to one" lye to AN is by weight and by ammonia content of the ammonium salt, not the total weight of the salt itself. It only took a small amount of experimentation to confirm this as fact.…
  • Smh... Damn, and here I was a sucker for it, believed he actually did it.
  • That depends entirely on your country as nh4no3 is easiest here, for me. I can WALK to my supply.
    in SnB Comment by wurfgurf July 2018
  • I'm personally not a fan of the methods involving no visual cues. However if you make the "bronze" first, then throw in your pill powder, you should be able to convert in entirety. 1800 psi is far beyond what is necessary as 100-125 (dependent on temp) should be all that's needed. If you are successful your way stick with…
  • I'm currently under investigation by my local police force due, I think, to my posts here. The only other option is that they are interested bc my Suzy purchases are a bit larger than average. I actually eat ephedrine. It wakes me up like meth but requires about ten times the dose to do similarly. Anyways, I AM being…
  • Oh yeah, the lithium amount is correct as u said it. One strip is best for that amount. However using two strips does NOT ,mean u used both strips. It just ensures u get enough bronze before integrity of the bottle is lost. U get bronze faster with two. When one has dissolved you can shake but if u prefer to add only one…
  • Ok, so here's an answer to your water question. Since water is produced, if the measurements to creat ammonia are stoichiometric then you have produced water. This can be counter acted by additional lye. Lye absorbs water and thus the more lye you add the slower the reaction. If the ratio is exact you will end up w a gummy…
  • Yes sir. I've personally and regretfully never used ephedrine but it's written by uncle fester to be better than pse as it gives up its hydroxyl group easier. In this situation though and correct me if I am wrong d-Ephedrine and d-Pseudoephedrine are the active subsatances found in most OTC cold preparations that can be…
  • Yes. Here's the thing with CAN: you can remove the calcium component by adding water, dissolving the AN, filtering, which leaves the calcium in the filter. Then you place the AN in a baking dish and bake on keep warm. A large bake dish is preferred so as to dry the stuff quickly. Don't go to warm bc this starts decomposing…
  • U can base out your pse with lye, shake after u add a np solvent and collect solvent if your pse is in there
    in SnB Comment by wurfgurf July 2018
  • Jesus I didn't know about the p2p in the lake deal, nor the garden gnome (lmfao)! You need to write more man your mind has seen great things!
  • If u prefer throwing the pse in after u have the bronze (which is a safer approach for the pse in case anything goes wrong) then that's fine. Your descriptions were very good and leads me to strongly believe you have decent experience with this tek. I'm definitely not trying to piss on your tek. I'm just trying to stop…
  • Oh yeah, ethanol is NOT A GOOD SOLVENT. It's an alcohol, just like sudafed. Pse is a secondary alcohol/amine with that Benzyl hydroxyl joint there. You'd have competition with the pse if you use ethanol. Acetone is even worse.. Use alcohol to clean the rxn vessel after u have already pulled all the pulls out and it's empty…
  • You did a good job here. I have wanted to see a new write up for the sake of curiosity, how others go about it. My only concerns are your bottle choice and lack of a write up on cleaning the rxn vessel after reaction. If a fool does this using water....smh. I once saw a bottle, back when I first started learning this, once…
  • I apparently cannot start a new discussion and since this is as close to the subject (without goodbye, as I should've said "for now" but ultimately could not) I originally started and since I'm in this for harm reduction and educational purposes only I feel I need to expound much further on what I've learned over the past…
  • Oh I forgot.. Since three ounces called for 500mls of nh3, and same of either toluene, hexane or ether (I believe that's even in order of bests) it can be said same applies on the miniscule. assume that a third, by volume, of your ammonium nitrate salt will become anhydrous ammonia and only 15 ml are really needed for…
  • Xylene is good for classic method, versus naphthalene, as a carrier solvent as its true name is dimethylbenzene. Remember like attracts like so methylbenzene, aka toluene, is best. For snb I would stick with naphtha bc it's good on plastics, smells far less, and can be a good solvent if heated. This is what you do: do your…
  • Wow I did type ten mgs... I meant mls.. I also meant to say this was a hypothetical experiment and thus didn't actually happen except in the recesses of my bored mind so back of polices, (in case they catch attention, again).
  • Wow I did type ten mgs... I meant mls.. I also meant to say this was a hypothetical experiment and thus didn't actually happen except in the recesses of my bored mind so back of polices, (in case they catch attention, again).
  • I'm getting a bad feeling from this.. I feel strongly inclined to remind people that I do not condone the use, manufacture and especially distribution of controlled substances. My experiences and shared testimony is merely presented as a means to harm reductionand also for entertainment purposes with a splash of education,…
  • You've got a lot going on there. I'm not gonna promise you anything, given so many variables, but I will say that experience has taught me that of all the meth techs out there, snb is the most forgiving of them all. I mean for starters you initiate the reaction with the one thing absolutely not supposed to be in contact…
  • I guess it truly depends on your skill level. Mine, w rp/I, is limited to three cooks, and one of them I completely fucked up. The other two, however, I got some decent crystal from. One especially so, however I couldn't shake the iodoephedrine at the time, something I've since learned how to do. But w the shake and bake,…
  • This would appear as a beautiful rainbow of translucent oil sitting on top and as it cools a waxy fat. It's very very pure. I'm looking into country mallow (sida rhombifolia) myself as it grows in the ditches here! Keep your eyes open, there's drugs everywhere
  • oh and if you are unsure of pills in your country, to anyone, and you have cough syrups liquid suspensions with pse in them then you have the easiest access to pse. Just add lye water to the syrup/suspension, add the np of choice (even dcm or chloroform, but if you use chloroform u don't have to add hcl as the base…
  • Yes, it'll work for shake and bake. Any pill with pse will work, unless they have that new "meth shield" formula which I've not had the misfortune of dealing with yet. I played with a batch of nexafed, to see if I could isolate the pse. I did, but it was not completely isolated. I dropped the pills whole in one container,…
  • Also, can you please explain this: " The clear conclusion is he was born in Kenya, not Hawaii and clearly knows nothing about meth, he's copy-pasting specifically written, well ordered answers to individuals personal questions. Even when those questions are as ill thought out, illogical and/or repetitive as every combo…
  • Oh, there's a method more common in industry taking thebaine and either decarboxylating or reducing, can't remember.. Either way thebaine or codein are good starts... I'm curious about reduction using rp/I, but curious only, not dying curious, as death would be an ultimate consequence fucking w krokodil
  • Hey bud, sorry I thought you were Enso. It was more of a feeling than a thought. Seemed to make sense.. Anyways.. Yeah, he definitely had a clear, well written speech and seemed to be of use in harm reduction. However it seems to me that some of the posts he claimed as his ideas were reposts of methods that are not…
  • Wow, nice! I just taught a dude how to do it over in Cyprus, Greece, over the messenger, telegram
  • Nice, good to hear a success, and by doing in the original method. Yeah, the SS bottles are good for maybe a cook or two. Depends on your solvent really. Ether was the kindest solvent (not ther pure, but starting fluid, so probably a 50/50 w heptane, and heptane is even better than ether) for maintaining a bottle for use…
  • i figure I ought to add the acid I saw on a synth web site: d-tartaric acid. This is the cheaper type of tartaric than l or even racemic. Racemic is a sure sign something is manmade. Natural tartaric acid is the acid from fruits.
  • For the guy who asked last question with oz as locale, look in the auto parts store or auto cleaning store for a compound called "hexane" or isohexane. These are every bit the same in behavior as ether, but they hold more alkaloids than ether can, even hot ether vs colder hexane. It will likely come in a can like a spray…
  • Oh yeah, in reference to extraction via a/b p/np I meant to say shake and separate organic after it settles. The percentage of alkaloids varies of course but usually spa round one percent dry leaf matter at the least. If you use ten kilos of leaf matter from the yew then the nonpolar solvent is unnecessary as long as the…
  • Oh god, turned black? It should turn to clear liquid, boil and maybe just maybe leave a fog, if anything at all, unless you are putting CHUNKS. But black is not a color I'd be interested in seeing, at least not like that. Oh, dean, the "all killer" fool was none other than the same "twat", Enso. That's how you know he was…
  • For sure. I've reached out to him, in two of his accounts but he's shamed off I guess. Any problem u may have can be dealt with. He wasn't a mind, but a collector. He was basically a search engine and for that I guess it's got it's advantages.